This is our download section about our products and services. By clicking on the download button you can get specific information.
Brake Handling Tool
This tool is used to lift and rotate the brake during removal and installation.
Engine Change Sling
The sling is designed to change CFM56-5A/-5B and V2500 engines on A320 family aircraft with or without inlet cowl / nozzle.
The engine is attached to three points, two at the fan case and one at the turbine case.
Tank Ventilation Cart
The Tank Ventilation Cart (TVC) is designed to ventilate A/C's kerosene tanks efficiently and safely.
On-site Proof Load Testing
The LEOS On-site Proof Load Testing system allows MRO providers to trust 100 percent in the reliability of aircraft jacks.
With this new development water can be drained from fuel tanks. It is universal and can be used on all Airbus and Boeing aircraft types.
Fuel Tank Working Pad
This special working pad can be used in all aircraft fuel tanks. The work for the mechanics in the fuel tank will be more convenient and safe.
The elephant's saddle was mainly developed for installation and maintenance of aircraft antennas. It can also be used to repair the aircraft, e.g. after being struck by lightning.
The Water Disinfection Cart is designed for easy and comfortable sterilizing of the A/C's potable water system.
Every time the aircraft is in the hangar with the avionics vent system running, the silencer can be attached to the avionics vent exhaust of the elec/elex bay to reduce the operational noise.
Wheel Change Fork
The wheel change fork is for all Airbus and Boeing wheels. It is used to lift and move the wheel from the axle during wheel and brake change.
Exhaust Nozzle CFM56-5C
Maintenance personnel know how complicated and time consuming the removal/installation of the exhaust nozzle CFM56-5C can be.
Toilet Bleed Air Filter
Create a working environment in which mechanics can pay full attention to their jobs, without being distracted by unpleasant odours.
Foot-operated, pneumatic (air or nitrogen) hydraulic pump used exclusively to supply hydraulic pressure to the actuator that opens the Thrust Reverser "C" Ducts for engine maintenance.
Aircraft Maintenance Vans
For quick, thorough, and efficient maintenance and small repairs of aircraft straight on the ramp.
The Refilling Cart is used for topping up the engine with CSD/IDG-oil. It includes a service stair for service personnel, along with a nitrogen-driven filling pump on a unifi ed chassis.
Cover - Static Port
The Cover – Static Port is used to shut the static ports during aircraft parking and washing on all aircraft types. Installation is quick and easy. Also a leak test static probe can be performed on the aircraft.
Seat Transport Dolly
This Dolly is to carry all kinds of economy seats. With its easy handling it is possible for only one person to handle even the four seat benches.
Fuel Drain Suction Unit
Aircraft tanks have to be completely drained before an inspection or before any necessary repair work can be started. With the new wet vacuum cleaner developed by Lufthansa LEOS draining is safe and simple.